| |
FLEX I/O & FLEX
Integra
 最新最新
来自罗克韦尔自动化AB FLEX 一体化现在可以提供16点I/O模块.4种24V直流输入模块及4种24V直流输出
模块满足你的需求,你可以选择螺丝端子或弹簧端子,这些
模块可以显著降低你的采购费用.
FLEX I/O
FLEX I/O provides a compact modular I/O assembly that consists of a maximum
of 8 I/O modules, a terminal base for each I/O module, and an I/O adapter
module with a built-in 24V-dc-input power supply. FLEX I/O can be used
in PLC and SLC systems.
- To connect FLEX I/O
on a Universal Remote I/O link, choose the 1794-ASB, -ASB2, FLEX I/O
adapter
- To connect FLEX I/O
on a DeviceNet network (an open-standard device-level network) choose
the 1794-ADN FLEX I/O adapter
- To connect FLEX I/O
on a ControlNet network, choose the 1794-ACN, -ACNR FLEX I/O adapter
Use FLEX I/O for distributed applications
where you need multiple types of I/O near a machine.
For additional information on FLEX
I/O modules, see:
FLEX 一体化
FLEX Integra allows you to remove and insert modules under backplane power
without rewiring or disrupting your system. These modules also combine
field-wiring terminations and the I/O interface into the same location,
saving time and money and making the system easy to maintain and troubleshoot.
| DC
Modules |
| 1793-IB4 |
24V dc 4 point sinking input
module with screw terminal base |
| 1793-IB4S |
24V dc 4 point sinking input
module with spring clamp terminal base |
| 1793-OB4P |
24V dc 4 point sourcing output
module with screw terminal base |
| 1793-OB4PS |
24V dc 4 point sourcing output
module with spring clamp terminal base |
| 1793-IB2XOB2P |
24V dc 2 in 2 out sink/source
combo module with screw terminal base |
| 1793-IB2XOB2PS |
24V dc 2 in 2 out sink/source
combo module with spring clamp terminal base |
Relay Modules |
| 1793-OW4 |
4 point relay contact with screw
terminal base |
| 1793-OW4S |
4 point relay contact with spring
clamp terminal base |
Analog Modules |
| 1793-IE4 |
4 point analog input module
with screw terminal base |
| 1793-IE4S |
4 point analog input module
with spring clamp terminal base |
| 1793-OE2 |
2 point analog output module
with screw terminal base |
| 1793-OE2S |
2 point analog input module
with spring clamp terminal base |
| 1793-IE2XOE1 |
2 in 2 out analog combination
module with screw terminal base |
| 1793-IE2XOE1S |
2 in 2 out analog combination
module with spring clamp terminal base |
For additional information on FLEX
Integra modules, see:
Features
- Modular I/O
- Compact design
| – |
The flexible compact design
of the FLEX I/O assembly saves panel space. |
| – |
No space wasted for unused
I/O module slots. You only add the number of terminal bases needed
for the number of I/O modules |
| – |
No space wasted for a separate
power supply because the I/O adapter converts 24V dc into 5V dc
backplane power for I/O |
| – |
No space wasted for separate
terminal blocks. FLEX I/O terminal bases provide all the screw
terminals you need for two-wire or three-wire sensors/actuators
in the same compact space |
| – |
Mount in horizontal or vertical
rows |
- Low-cost I/O system
- Keyed interlocks
(mechanical and electrical)
- Integrated terminations
- Quick installation
| – |
The adapter, terminal base,
and I/O modules are separate components that snap together easily
onto a DIN rail |
| – |
Snap the I/O adapter onto
the DIN rail |
| – |
For each I/O module (8 maximum)
snap a terminal base onto the DIN rail to the right of adapter |
| – |
Plug each I/O module into
its terminal base |
| – |
Wire sensors/actuators directly
to the terminal base |
- Troubleshoot with
ease
| – |
Remove and insert I/O modules
under backplane power (Remove user-side power before removing
or inserting this module. This module is designed so you can remove
and insert it under backplane power) |
| – |
Each I/O status indicator
on the I/O module lines up directly above the I/O terminal on
the termination base |
 |
Specifications
|
Shock Operating: 30g
peak accel., 11 (±1) ms pulse width
Shock Non-Operating: 50g peak accel., 11 (±1) ms pulse width
Vibration: Test 5g @ 10-500 Hz per IEC 68-2-6
Dimensions: (HxWxD) 46 x 94 x 53 mm (1.8 x 3.7 x 2.1 in)
Weight: 0.1 kg (0.3 lb)
|
